Hubner EGS 40 Series User Manual

English
Translation of the original Operating and Assembly Instructions EGS40_MANUAL-en_R6(2018-11-07)ID74528.docx
ID 74528
Operating and Assembly Instructions
Electronic Overspeed Switch
EGS
®
40
Option S (integrated EGS
®
4 technology with incremental encoder type FG)
Read the Operating and Assembly Instructions prior to
assembly, starting installation and handling!
Keep for future reference!

Hubner EGS 40 Series Specifications

General

Brand	Hubner
Model	EGS 40 Series
Category	Switch
Language	English

Summary

Safety Precautions

Owner Responsibility and Intended Use

Improper Use and Prohibited Operations

Special Dangers and Safeguarding

Highlights specific hazards like electrical shock, rotating shafts, and safeguards against unauthorized restart.

Technical Data and Specifications

Type Plate Details

Device Type Key Explanation

Mechanical and Electrical Specifications

Lists mechanical data, connected loads, and detailed electrical output configurations for various models.

Speed and Switching Performance Metrics

Defines programmable switching speeds, accuracy, hysteresis, and delay parameters.

Degree of Protection and Environmental Limits

Specifies IP ratings, permissible speeds, rotor inertia, and breakaway torque.

Output Configurations

Installation and Commissioning Procedures

Available EGS 40 Versions

Installation Tasks and Coupling Assembly

Details the steps for device installation, including flange/foot mounting and coupling assembly.

Programming and Software Operations

Computer Preparation and Driver Installation

Outlines system prerequisites and steps for installing necessary software drivers.

Software Launch and COM-Port Configuration

Guides on launching the EGS4Pro software and configuring the communication port.

Data Management and Device Security

Explains how to read, save, and lock device data using the software interface.

Switch Testing and Operational Monitoring

Faults and Troubleshooting

Safety During Fault Correction

Emphasizes safety procedures and hazards during fault correction and component handling.

Fault Identification and Resolution

Provides a table listing common malfunctions, their possible causes, and troubleshooting steps.

Device Testing and Maintenance Schedule

Testing Safety Guidelines

Cyclic Test Schedule

Connection Diagrams

Electrical Connection Details