To Next Page

To Previous Page

Electronic Overspeed Switch EGS 40

EGS40_MANUAL-en_R6(2018-11-07)ID74528.docx

5.3 Transport inspection

Check delivery immediately upon receipt for completeness and possible transport damage.

5.4 Packaging

Handling packaging materials

The packaging is not taken back and must be disposed of in accordance with the respective statutory

regulations and local guidelines.

Storage of packed goods

 Store in a dry and dust-free location.

 If stored for longer periods (> 6 months) we recommend sealing the devices in foil,

possibly with a desiccant.

 Do not expose to aggressive media.

 Storage temperature: - 15 °C … +40 °C.

 For storage periods longer than 6 months: Contact the manufacturer.

6 Installation and commissioning

6.1 Versions

CAUTION!

Consider chapter 2

EGS 40K standard version

1 terminal box, 2 programmable switching points, system check, switching voltage: 2 V … 30 VDC,

optional 30 … 230 VAC/DC, max. switching load 0.3 A.

EGS 40KK optional (partially redundant) version

2 terminal boxes, 2 + 2 programmable switching points, two-fold system check, switching voltage: 2 V

… 30 VDC, optional 30 … 230 VAC/DC, max. switching load 0.3 A.

EGS

40K… devices must only be used for the monitoring of overspeeds in safety-relevant machinery

and installations when applicable rules, regulations and laws are observed and they have to be

periodically tested. The tests must be recorded and have to be periodically tested. The tests must be

recorded and have to be evidenced (see test schedule 9.2).

Furthermore we wish to draw your attention to the relevant nationally applicable laws, regulations and

standards as well as the operating instructions that govern the safety and commissioning of individual

components and the complete installation as well as the periodically testing (electrical and mechanical

function tests).

Hubner EGS 40 Series User Manual

Questions and Answers: