Electronic Overspeed Switch EGS 40
EGS40_MANUAL-en_R6(2018-11-07)ID74528.docx
7 Programming instruction
When the device is connected to a PC via a USB port for the first time it will be recognized as new
hardware.
7.1 Preparing the computer
System prerequisites:
Windows
®
98 / NT / 2000 / XP, for transfer of administrator rights to the program: Vista-compatible
Windows 7
CD-ROM drive, USB interface.
Use the supplied CD-ROM or download the current version of the EGS
®
40-Pro from our homepage
(see page 2).
7.2 Installation of a new driver
Connect the device to your PC using the supplied USB to mini USB cable.
Pay attention to the fact that you have Administration Rights.
The "New hardware found pop-up" is displayed informing you that
a new "USB device" or a HJG device is connected.
The Hardware Update Wizard window opens automatically.
In response to the question requesting a Windows update select
"No, not this time", then click "Next".
Select the option "Install software from a list or another source",
then click "Next".
To Next Page
Loading...
Need help?
General
