Hubner EGS 40 Series User Manual

Electronic Overspeed Switch EGS 40
2
EGS40_MANUAL-en_R6(2018-11-07)ID74528.docx
Trademark
EGS is a registered trademark of Johannes Hubner Fabrik elektrischer Maschinen GmbH.
Windows is a registered trademark of Microsoft Corporation in the Unites States and other countries.
All other brand names and product names are trademarks or registered trademarks of their respective
owner.
Protected trademarks bearing a ™ or ® symbol are not always depicted as such in the manual.
However, the statutory rights of the respective owners remain unaffected.
Manufacturer / publisher
Johannes Hubner
Fabrik elektrischer Maschinen GmbH
Siemensstraße 7
35394 Giessen
Germany
Phone: +49 641 7969 0
Fax: +49 641 73645
E-Mail: info@huebner-giessen.com
www.huebner-giessen.com
Headquarters: Giessen
Court of registration: Giessen
Commercial register number: HRB 126
The manual has been drawn up with the utmost care and attention. Nevertheless, we cannot exclude
the possibility of errors in form and content. It is strictly forbidden to reproduce this publication or parts
of this publication in any form or by any means without the prior written permission of
Johannes Hubner Fabrik elektrischer Maschinen GmbH.
Subject to errors and changes due to technical improvements.
Copyright © Johannes Hubner Fabrik elektrischer Maschinen GmbH
All rights reserved.

Hubner EGS 40 Series Specifications

General

Brand	Hubner
Model	EGS 40 Series
Category	Switch
Language	English