Huck 202 - Specifications

5
202 Series Tooling (HK938) Alcoa Fastening Systems
5.385
137
11.575
294
8.595
218
.79
20
3.445
87.5
1.10
28
1.580
40
ø
4.105
104
ø
10°
STROKE: .75 in (1.90 cm)
WEIGHT:
202 & 202L: 5.1 lbs (2.31 kg)
MAX AIR PRESSURE: 90 psi (6.2 BAR)
MAX FLOW RATE: 8.5 scfm (241 l/m)
CAPACITY:
3889 lbs (17.3 kN) @ 90 psi (6.2 BAR)
SPEED/CYCLES: 20 per minute
MAX OPERATING TEMPERATURE:
125° F (52° C)
POWER SOURCE:
90psi MAX shop air
HYDRAULIC FLUID:
ATF meeting DEXRON III, DEXRON IV, MERCON,
Allison C‐4 or equivalent specifications.
Fire resistant hydraulic fluid may also be used,
and is required to comply with OSHA regulation
1926.302 paragraph (d): "the fluid used in
hydraulic power tools shall be fire resistant fluid
approved under schedule 30 of the US Bureau
of Mines, Department of Interior, and shall
retain its operating characteristics at the most
extreme temperatures to which it will be
exposed."
S
S
PECIFICATIONS
PECIFICATIONS
Models
202, & 202L