16. Direction/Menu Operation
In OSD Menu: traverse OSD Menu
Out of OSD Menu: pan & tilt camera
17. Preset Settings
Use the Number Keys to input a preset number, then press call, store, clear to perform the
corresponding command.
18. Enter
After inputting numbers, press this button to confirm.
IR Remote Shortcuts _
• [F1] > [1] > [ENTER] - Change camera to Device Address 1
• [F1] > [2] > [ENTER] - Change camera to Device Address 2
• [F1] > [3] > [ENTER] - Change camera to Device Address 3
• [F1] > [4] > [ENTER] - Change camera to Device Address 4
• [F1] > [5] > [ENTER] - Start Tracking
• [F1] > [6] > [ENTER] - End Tracking
To Next Page
Loading...
