Huffy 700c - Seat Installation (Quick Release & Bolt Mount)

13
CAUTION: If you accidentally drop the seat post into the seat tube, it may be
diffi cult to remove it.
• Point the Seat (35) forward and put the
Seat Post (32) into the Seat Tube (B)
(fi gs 10, 11).
WARNING: To prevent the seat com-
ing loose and possible loss of control, the
“MIN-IN” (minimum insertion) mark (C) on
the seat post must be below the top of the
Seat Tube (B).
g 10
35
C
B
32
C
B
Quick Release Lever (various models)
Tighten the quick release lever:
• Move the Quick Release Lever (D) to
the “open” position so the word “open”
is pointing away from the Seat Post
Clamp (E).
NOTE: The words “open” and “close” are on
opposite sides of the quick release lever.
g 11
E
B
F
32
D
Seat Installation - continued