27
Removing Rear Drive Wheel
D
A
B
E
F
C
C
SHOULD YOU
NEED TO REMOVE
REAR DRIVE WHEEL,
FOLLOW THESE STEPS:
1. Pull o axle nut Covers
A
.
• NOTE: Right side will have wire
harness attached. Use caution.
2. Unplug Wire Harness
B
.
3. Loosen the Axle Nuts
C
(both sides).
4. Loosen Chain Adjuster
D
enough to
lift chain o sprocket.
5. Gently remove rear wheel assembly.
• To reinstall wheel, follow the steps
above in reverse order - making sure
chain adjustment arm
E
is on outside
of frame and disc brake ts evenly into
disc brake housing
F
.
• Adjust chain tension according to Chain Adjustment instructions in this manual.