7
Owner’s Bicycle Identi cation Record
A bike which you ride only on paved surfaces, should give you a minimum
stand-over height clearance
of 2 inches (5 cm). A bike that you’ll ride on
unpaved surfaces should give you a minimum of 3 inches (7.5 cm) of stand-
over height clearance. And a bike that you’ll use o road should give you 4
inches (10 cm) or more of clearance.
NOTE: See Assembly sections for Seat adjustment.
Adjust the seat height so that you can put the heel of one foot
on a pedal with leg extended straight
A
- and so the opposite
foot can reach the
ground with tip of
foot
B
. This will give
your knees a slight
bend when pedalling
with the ball of the
foot.
Fitting the Rider to the Bicycle
NOTE: This information is only available on the
bicycle itself.
Each bicycle has a Recovery Code stamped into the
frame. The Recovery Code
can be found on the
bottom of the crank housing as shown.
Write this number below to keep it for future
reference.
If the bicycle is stolen, give this number and a
description of the bicycle to the police. This will help
them nd the bicycle.
1
Recovery Code:
Purchase Date:
Model Name:
1
A
B
To Next Page
Loading...
Need help?
General
