Huion Inspiroy Q11K v2 - User Manual

User Manual
For Windows and Macintosh OS

Summary

Precautions

Product Overview

Tablet Introduction

Overview of the HUION INSPIROY Q11K V2 wireless graphics tablet, its features, and benefits.

Product and Accessories

Visual identification and description of the graphics tablet and its included components.

Stylus Pen Details

Detailed description of the battery-free stylus pen, including its pressure sensitivity capabilities.

Wireless Receiver Functionality

Explanation of the wireless receiver required for wireless mode operation.

Included Accessories List

Comprehensive list and images of all accessories provided with the graphics tablet.

Wired Tablet Connection

Step-by-step guide on how to connect the graphics tablet to a computer using a USB cable.

Wireless Tablet Connection

Instructions for setting up and using the wireless connection mode for the graphics tablet.

Driver Installation and OS Support

Guidance on installing the tablet driver, including supported operating systems.

Pen Nib Replacement Procedure

Detailed steps for safely replacing the stylus pen nib when it becomes worn out.

Product Basic Operation

Using the Graphics Pen

Instructions on how to properly hold and operate the stylus pen, including cursor control.

Pen Button Functionality

Explanation of how to customize and use the programmable buttons on the stylus pen.

Tablet Operation and Charging

Guide to using the tablet's power switch, press keys, and battery charging process.

Function Setting and Configuration

Device Connection Status Indicators

Understanding the on-screen prompts that indicate the tablet's connection status with the computer.

Working Area Setup for Monitors

Configuring the tablet's active area to map accurately to your computer monitor(s).

Rotating the Tablet Working Area

Instructions for rotating the tablet's mapping orientation to suit different hand preferences.

Press Keys Customization

Setting custom functions for the physical express keys located on the graphics tablet.

Stylus Pen Button Customization

Assigning specific functions to the buttons on the stylus pen for efficient workflow.

Pressure Sensitivity Settings

Adjusting the pen's pressure sensitivity to control line thickness and opacity in applications.

Pen Pressure Testing Tool

Using the built-in tool to test and verify the pen's pressure sensitivity performance.

Windows Ink Integration

Enabling and utilizing the Windows Ink feature for improved pen input experience.

Driver Data Management

Exporting and importing custom driver settings for backup or transfer to other systems.

Technical Specifications

Troubleshooting Common Issues

Tablet Performance Problems

Solutions for common malfunctions and abnormal phenomena occurring with the graphics tablet.

System and Connectivity Issues

Troubleshooting problems related to system recognition, connectivity, and charging.

Regulatory Compliance Notices

Customer Support and Contact

Overview

1. Function Description
2. Important Technical Specifications
3. Usage Features
4. Maintenance Features

The HUION®INSPIROY® Q11K V2 is a professional battery-free wireless graphics tablet designed to enhance efficiency in painting and creative tasks for users on both Windows and Macintosh operating systems. It offers a natural drawing and writing experience, mimicking the feel of a pen on paper.

Function Description

The Q11K V2 functions as a digital input device, allowing users to draw, write, and interact with their computer using a stylus pen. It supports both wired and wireless modes of operation. In wired mode, the tablet connects to the computer via a Micro USB cable, which also charges the internal battery. In wireless mode, a wireless receiver is inserted into the computer's USB port, and the tablet's power switch is toggled on. The tablet features 8 customizable press keys on its top-left side, which can be configured through the driver interface to improve workflow efficiency. The stylus pen itself also has two customizable side buttons.

Important Technical Specifications

Creative Pen Tablet (Q11K V2):

• Model: Q11K V2
• Touch Technology: Battery-free Electromagnetic Resonance
• Working Area: 279.4 x 174.6 mm (11 x 6.875 inches)
• Dimension: 390 x 223 x 11 mm
• Net Weight: 0.88 kg
• Touch Resolution: 5080 LPI (Lines Per Inch)
• Report Rate: 266 PPS (Points Per Second)
• Pen Sensing Height: 10 mm
• Interface: Micro USB
• Press Keys: 8 Customized Press Keys
• Wireless: 2.4G
• Wireless Distance: Approx. 10-15m (depending on the actual use environment)
• Battery Capacity: 2500 mAh
• Life Time: Approx. 30 hours
• OS Support: Windows 7 or later, macOS 10.12 or later

Stylus Pen (PW500):

• Model: PW500
• Pressure: 8192 Levels
• Accuracy: ±0.3 mm

Usage Features

Pen Usage:

• Holding the Pen: Users should hold the pen like a normal pen or pencil, ensuring the side switch is easily accessible by the thumb or forefinger without accidental presses.
• Positioning the Cursor: Moving the pen slightly above the active area of the tablet moves the cursor on the screen.
• Clicking: Tapping the pen tip on the screen registers a click. A single tap highlights or selects an item, while a double-tap opens it.
• Moving Objects: Selecting an object and sliding the pen tip across the screen moves the object.
• Side Buttons: The pen's side buttons can be customized for two different functions and are active when the pen tip is within 10mm of the tablet's active area, without needing to touch the tablet.

Tablet Usage:

• Power Switch: Located on the top left, it powers on the tablet for wireless use.
• Sleep Mode: The tablet enters sleep mode after 15 minutes of inactivity or if the power button is pressed for 3 seconds. It can be woken up by toggling the power switch off and then on.
• LED Indicator:
  • White: Pen or touch signal detected.
  • Off (working): No pen or touch signal.
  • Red flashes: Low battery, needs charging.
  • Red (charging): Charging in progress.
  • Off (charging): Fully charged.
• Press Keys: The 8 press keys are customizable via the driver interface to suit user habits and improve work efficiency.
• Charging: The tablet's 2500 mAh battery takes approximately 7 hours to fully charge from empty via the Micro USB cable. Charging occurs whenever the USB cable is connected and the battery is not full. Wireless mode is disabled when the tablet is connected via USB.

Driver and Software Settings:

• Driver Installation: The driver supports Windows 7 or later and macOS 10.12 or later. It is crucial to uninstall any other similar product drivers (including older versions of this product's driver) and close all graphics and anti-virus software before installation to avoid conflicts. A successful installation is indicated by a gray driver icon in the system tray, which turns colored when the tablet is connected and recognized.
• Working Area Setting:
  • Multiple Monitors: Users can define the mapping between the tablet's active area and specific monitors in a multi-monitor setup (extended mode). In mirror mode, the tablet maps to all monitors simultaneously.
  • Full Area: The entire active area of the tablet is mapped to the screen by default.
  • Customized Area: Users can input coordinate values or drag graphic corners to select a specific screen area for mapping.
  • Rotate Working Area: The tablet's orientation can be rotated by 0°, 90°, 180°, or 270° to accommodate left or right-hand operation.
• Press Keys Function Setting: Default functions can be viewed by hovering over or clicking a press key. Customized functions are set via a pop-up dialog, applied by clicking APPLY or OK. Press keys can be enabled or disabled.
• Pen Buttons Function Setting: Similar to press keys, pen button functions are customized via a pop-up dialog and applied with APPLY or OK.
• Pressure Sensitivity Setting: Pressure sensitivity can be adjusted by dragging a slider up or down; a smaller value indicates higher sensitivity.
• Pen Pressure Testing: A "start pressure test" feature allows users to test pressure levels by applying pressure to the stylus on the screen. A "Clear" button removes all ink from the test.
• Windows Ink Feature: The tablet supports Windows Ink, enabling pen features in applications like Microsoft Office, Windows Journal, Adobe Photoshop CC, and SketchBook 6.
• Data Export and Import: The driver allows exporting and importing custom configuration data, simplifying settings transfer across different software or systems.

Maintenance Features

General Precautions:

• Read the manual carefully and keep it for future reference.
• Unplug the power cord and wipe with a soft damp cloth for cleaning; avoid detergents.
• Do not expose the product to water or other liquids to prevent malfunction or electrical shock.
• Keep the tablet away from unstable surfaces and out of reach of children to prevent accidents. Prevent children from swallowing pen nibs or side switches.
• Power off the tablet in locations where electronic device use is restricted (e.g., airplanes) to prevent interference.
• Switch off the tablet when not in use to save power.
• Do not disassemble or modify the tablet or pen, as this voids the warranty and can cause damage or injury.
• Ensure that any replacement components are manufacturer-specified to avoid fire, electric shocks, or other dangers.
• Do not insert foreign material into USB ports or other openings to prevent malfunction, burnout, or electrical shock.

Pen Nib Replacement:

• Pen nibs wear out over time and should be replaced when necessary. The manual provides a visual guide for replacement.

Troubleshooting: The manual includes a dedicated section for troubleshooting common issues related to the tablet and system, offering possible solutions for problems such as:

• No pressure in graphics software but cursor moves.
• Flashing red battery indicator.
• Pen not working.
• Press keys not working.
• Unstable cursor or crooked drawing lines in wireless mode.
• Computer unable to enter sleep mode.
• Pen side button not working.
• Computer not recognizing the tablet or wireless receiver.
• Tablet charging stopping when the computer enters sleep mode.

After-service Contact: For further information or support, users can contact SHENZHEN HUION ANIMATION TECHNOLOGY CO.,LTD. via email at service@huion.com or visit their website at www.huion.com for the latest drivers and user manuals. Information in the manual is subject to change without notice.

Huion Inspiroy Q11K v2 Specifications