Need help?Do you have a question about the Humminbird HDR 650 and is the answer not in the manual?
General| Brand | Humminbird |
|---|---|
| Model | HDR 650 |
| Category | Fish Finder |
| Language | English |
Provides an overview of the installation process and lists all necessary supplies and tools.
Details the step-by-step process for installing the main HDR 650 control head unit.
Guides on selecting an appropriate mounting position and drilling the required dashboard hole.
Explains how to customize the unit's appearance with face plates and assemble its components.
Details the physical installation of the HDR 650 control head into the prepared dashboard opening.
Covers installing the buzzer and connecting the power supply cable to the unit.
Provides initial steps and guidance for installing the sonar transducer.
Guides on finding a turbulence-free spot on the transom for optimal transducer performance.
Details positioning the mounting bracket and drilling pilot holes on the boat's transom.
Covers assembling the transducer bracket and adjusting its initial angle and position.
Explains how to route the transducer cable and connect it to the HDR 650 unit.
Covers performing final tests and permanently securing the transducer assembly.
Optional steps to lock the transducer bracket, preventing it from kicking up.
Guides on selecting the best location inside the hull for optimal sonar signal transmission.
Recommends a trial installation to verify signal strength and positioning before permanent mounting.
Details how to route the transducer cable from the hull to the depth sounder unit.
Explains how to permanently affix the transducer inside the hull using epoxy.
Describes available options and kits for mounting transducers on trolling motors.
Introduces the display, buttons, and basic functions of the HDR 650 sonar unit.
Explains how to power the unit on/off and navigate menus using the keypad controls.
Guides on configuring depth units (feet, meters, fathoms) and setting shallow/deep alarms.
Details how to set depth readings relative to the waterline or the boat's keel.
Provides instructions for cleaning and caring for the HDR 650 unit, including the display lens.
Advises on cleaning and maintaining the transducer for optimal sonar signal performance.
Helps diagnose and resolve common problems related to the HDR 650 not powering on.
Addresses issues like no bottom reading, shallow water display loss, or screen clarity.
Outlines the terms and conditions of the product's one-year limited warranty against defects.
Explains the company's policies and procedures for factory service and product repairs.
Provides detailed instructions on how to prepare and send the unit for repair or service.
To Next Page