Humphree HCS-5 - IMPORTANT NOTICES

6
OPERATOR MANUAL HCS-5 020310 5.7.x 03
IMPORTANT NOTICES
● The following manual is provided for Humphree service workshops, ship-builders, machine manufacturers,
and other authorized workshops that have personnel with qualied professional training. The installation
instructions are only for professionals. If the installation instructions are not followed or if the work is carried
out by non-professional personnel, Humphree will not assume any liability for damage that may incur to
materials or personal injury.
● The information in this document is the property of Humphree and may not be copied or communicated to
a third party, or used for any purpose other than that for which it is supplied, without the express written
consent of Humphree. This information is given in good faith based upon the latest information available to
Humphree, no warranty or representation is given concerning such information, which must not be taken
as establishing any contractual or other commitment binding upon Humphree or any of it subsidiary or
associated companies.
● If the manual is lost or worn, see www.humphree.com or contact your local Humphree dealer.
● The contents of the manual and equipment specications are subject to change without notice.
● All illustrations in the manual are schematically correct but may not be exact copies of the corresponding
equipment on your vessel.
● The screens shown in the manual may not match in detail the screens you see on the display. The screens you
see depends on software versions, system conguration and system settings.
● Humphree will assume no responsibility for damage caused by improper use or modication of the
interceptor system parts, or claims of loss of prot by a third party.
● The interceptor system is protected by patent.
● Inspect the parts at arrival for damage occurred during transportation.