To Next PageTo Next PageWhy do calm days cause spillage into the room when using my Hunter Stoves Stove?
If calm days are causing spillage into the room with your Hunter Stoves Stove, it is because of over sized flue giving poor flue draught. Weather conditions combined with the flue terminal position can have an effect on the stoves performance, so it is best to speak to your installer.
Why is the heat output low on my Hunter Stoves Stove?
If your Hunter Stoves Stove isn't producing enough heat, it could be due to a low flue draught. In this case, speak to your installer for advice on a suitable flue system. Another potential cause is using wet wood with a moisture content over 20%. Make sure to use dry, seasoned wood with less than 20% moisture content.
Why does my Hunter Stoves HAWK 4 Stove have a short burn time?
A short burn time in your Hunter Stoves Stove could be because you're using wood with a moisture content over 20%. To fix this, ensure you use dry, seasoned wood with less than 20% moisture content.
Why is my Hunter Stoves HAWK 4 producing smoke and small flames?
If your Hunter Stoves Stove is producing smoke and small flames, the problem might be that you are using wood with a moisture content over 20%. To solve this, ensure you use dry seasoned wood with less than 20% moisture content.
What causes wind noise in my Hunter Stoves Stove?
If you are experiencing wind noise with your Hunter Stoves Stove, it is caused by high flue draught, so it is best to speak to your installer.
How to correctly use the air control on my Hunter Stoves Stove?
To ensure correct use of the air control on your Hunter Stoves Stove, see user instructions for correct use of air control.
Why is my Hunter Stoves Stove giving off low heat output?
If your Hunter Stoves Stove isn't producing enough heat, it might be because of a low flue draught. It is best to speak to your installer for advice on a suitable flue system. Another reason could be wet wood with a moisture content over 20%. Make sure to use dry, seasoned wood with a moisture content less than 20%.
How to prevent creosote build-up in chimney of my Hunter Stoves Stove?
Creosote buildup in your chimney connected to your Hunter Stoves Stove is often caused by using wood with a moisture content exceeding 20%. To prevent this, use dry, seasoned wood with less than 20% moisture content. Also, operate the stove at a high temperature for short periods each time it is used to avoid large buildups of tars and creosote.
Why is there excessive smoke coming into the room when I open the door of my Hunter Stoves Stove?
If excessive smoke enters the room when you open the door of your Hunter Stoves Stove, it could be due to low flue draught. In this case, speak to your installer. Another cause might be incorrect additional ventilation air into the building, so speak to your installer about this as well.
Why is tar coming from the flue joints of my Hunter Stoves Stove?
If you notice tar coming from the flue joints of your Hunter Stoves Stove, it could be due to operating the appliance at continuous low temperatures. To resolve this, operate at a high temperature for short periods each time the appliance is used to avoid large build-ups of tars and creosotes. See user instructions for correct use of air control. Another cause may be using poor quality wood, so use dry seasoned wood (less than 20% moisture content).
General| Brand | Hunter Stoves |
|---|---|
| Model | HAWK 4 |
| Category | Stove |
| Language | English |
