To Next PageTo Next PageWhat to do if there is excessive smoke into room when I open the Hunter Stoves Stove door?
If excessive smoke enters the room when you open the appliance door of your Hunter Stoves Stove, this could be due to low flue draught or incorrect additional ventilation air in to the building. In both cases, it is best to speak to your installer.
How to prevent creosote build-up in chimney of my Hunter Stoves Stove?
Creosote buildup in your chimney connected to your Hunter Stoves Stove is often caused by using wood with a moisture content exceeding 20%. To prevent this, use dry, seasoned wood with less than 20% moisture content. Also, operate the stove at a high temperature for short periods each time it is used to avoid large buildups of tars and creosote.
Why is my Hunter Stoves Stove giving off low heat output?
If your Hunter Stoves Stove isn't producing enough heat, it might be because of a low flue draught. It is best to speak to your installer for advice on a suitable flue system. Another reason could be wet wood with a moisture content over 20%. Make sure to use dry, seasoned wood with a moisture content less than 20%.
Why does my Hunter Stoves HAWK 4 have lighting and burning problems on damp/rainy days?
If you're experiencing lighting and burning problems with your Hunter Stoves Stove on damp or rainy days, it could be due to low flue temperature or rainwater inside the flue. Use good quality wood to start and maintain the fire, and speak to your installer about fitting a rain cowl.
Why do calm days cause spillage into the room with my Hunter Stoves Stove?
If calm days are causing spillage into the room with your Hunter Stoves Stove, it could be due to an over-sized flue giving poor flue draught. Weather conditions combined with the flue terminal position can affect the stove's performance, so speak to your installer.
Why is it difficult to start and keep a fire burning in my Hunter Stoves Stove?
If you're having trouble starting or maintaining a fire in your Hunter Stoves Stove, it could be due to low flue draught. In this case, it's best to speak to your installer. Another cause might be using wood with a moisture content exceeding 20%. To resolve this, ensure you're using dry, seasoned wood with less than 20% moisture content.
Why is my Hunter Stoves HAWK 4 Stove making wind noise?
If you are experiencing wind noise with your Hunter Stoves Stove, this may be caused by high flue draught. Speak to your installer.
What to do if there is continuous smoke spillage into the room when my Hunter Stoves HAWK 4 is in use?
If there's continuous smoke spillage into the room when your Hunter Stoves Stove is in use, it's likely due to a blocked flue. To address this, open all doors and windows to ventilate the room and allow the fire to go out. Check the flue for blockage. Do not re-use the stove until the problem has been identified. If you're unsure, speak to your installer.
Why is there excessive smoke coming into the room when I open the door of my Hunter Stoves Stove?
If excessive smoke enters the room when you open the door of your Hunter Stoves Stove, it could be due to low flue draught. In this case, speak to your installer. Another cause might be incorrect additional ventilation air into the building, so speak to your installer about this as well.
What to do if I am unable to control the fire in my Hunter Stoves HAWK 4 Stove?
If you are unable to control the fire in your Hunter Stoves Stove, it may be due to high flue draught. In this situation, speak to your installer.
General| Brand | Hunter Stoves |
|---|---|
| Model | HAWK 4 |
| Category | Stove |
| Language | English |
