Hunter Alexander 51939 - Installing the Blades

5
6
1886
1886
Ceiling Bracket Hanging Fan Wiring Canopy Blades Light Glass/Bulbs Pull Chains
Installing the Blades
Repeat x5
x15
bag
Blade Screw
x15
bag
Blade Washer
Put the blade washers found in the hardware
bag onto the blade screws found in the
hardware bag. Then install the blade screws to
secure each blade to the fan.
Fan style may vary.
Note:
Fan style may vary.
Note:
Installing the Fan Body
2 of 4
Canopy Screw
bag
Install the remaining two
canopy screws by holding the
fan body cover to the ceiling
mounting plate. Tighten all
four screws securely.
Align the hanging slots on both
sides of the fan body with the two
partially installed canopy screws.
Slide the two slots on both sides of
the fan body between the head of
the screws and rotate the fan body
counterclockwise so the screws
hold the fan body rmly in place.
Using both hands, lift the fan body
from the hook
Installing the Bulbs and Glass
Assembling the LIght Kit
IMPORTANT
NOTE: Follow the instructions on the blade. Installing it
incorrectly could result in your fan not functioning.