Hunter Ellipse 90064 - Troubleshooting Common Issues; Fan Not Operating; Light Not Illuminating; Noisy Fan Operation

41722-01 09/09/2011
19
E7
N
E5
M
Align glass and push up.
Trouble Shooting
Problem: Fan does not come on.
Solution:
 •HunterFanBathVentilatorsareextremelyquiet.To
conrmthatthefanisrunning,placeyourhandnear
the vents to feel the air movement.
 •Turnpoweron,replacefuse,orresetbreaker.
 •Checkallplugconnectionstobesuretheyaresecure.
 •Checkthewiringtomakesureitmatchesthewiring
diagram.
Problem: Light does not come on.
Solution:
 •Replacethelightbulbwithanewbulb.
 •Turnpoweron,replacefuse,orresetbreaker.
 •Checkallplugconnectionstobesuretheyaresecure.
 •Checkthewiringtomakesureitmatchesthe
wiring diagram.
Problem: Fan is noisy.
Solution:
 •Checkandtightenallfasteners.
 •Checktheglasstomakesureitissecure.
 •Checktheappertomakesureitmovesfreely.
If you need parts or service assistance, please
call 888-830-1326 or visit us at our WEB site at
http://www.hunterfan.com.
Install 2 Max 60 Watt A-15 bulbs (Not Included)
and 1 Max 7 Watt C-7 bulb (Not Included).
E6
L
Slide light mount over posts and attach thumbscrews.
WARNING: To reduce the risk of electrical shock, all 4
thumbscrews MUST be properly installed.