8
61302-01 R20151201
Figure 10.
Cap
Front guard
Figure 11.
CARE AND MAINTENANCE
TECHNICAL SUPPORT
If you have any additional questions or problems with your Hunter Portable Fan,
please call:
We open 24 hours a day, 7 days a week. You may also reach us online at
www.HunterHomeComfort.com.
An electronic copy of this user manual can also be obtained online at
www.HunterHomeComfort.com.
USA: 1-888-880-3267
• Always unplug the appliance before cleaning.
• Do not immerse the fan in water or other liquids and never allow water to drip
onto the motor housing.
• Use only a soft, damp cloth to gently wipe the outer surfaces of the fan.
• To clean the interior:
a) First, turn the cap counter-clockwise to remove the cap from the fan.
(Figure 10)
b) Lightly push the bottom of the front guard and pull out the guard from the top.
(Figure 11)
c) Wipe the blades and guard with a soft damp cloth and mild detergent.
d) Wipe all parts dry with a dry cloth.
e) Attach the front guard back to the fan head and tighten with the cap by
turning the cap clockwise.
IMPORTANT: The front guard MUST be re-installed and tightened before
operating the fan.
• To clean between grills, we recommend using a pipe cleaner, exible dust
wand, vacuum cleaner or compressed air to gently remove dust.
• Do not use gasoline, paint thinner or any other corrosive cleaning solutions.
• If the fan will not be in use for an extended period of time, you may leave the
fan assembled. Cover to protect from dust. Store in a cool, dry place.
To Next Page
Loading...
Need help?
General