2
Do not discard the hardware bags or mix parts from
different bags. Make note of the symbol printed
on each hardware bag. The symbols can be used to
identify the appropriate hardware for each step.
For installing the blades
For installing the hanger bracket and wiring the fan
Hunter Pro Tip:
Find a part that is missing or damaged?
Don’t take it back to the store. Let us make it right. Visit us at HunterFan.com or call us at 1.888.830.1326.
Spare Parts
Balancing Kit
Oil Tube
Pull Chain Extension
Light Kit Adapter
For your convenience,
you may receive extra fasteners.
M3872-01 r040521
We recommend that you pull everything out of the box and lay it out. We have grouped
the drawn components below with the hardware you’ll need for those parts. The screws
below are drawn to scale to make it easier to identify what piece of hardware is needed
to install each component.
Here is what comes in your box:
If you are installing more than one fan, keep the blades
and blade irons in sets as they were shipped.
Installing Multiple Fans?
Canopy Assembly
Hanger Pipe
Motor
U-Bracket
Mounting
Bracket
Rubber Bushing
and Pin
Blade
Wire Nut
x2
x3
x5
x5
x15
x15
x10
3.5” Lag Screw
Blade Iron
Grommet
Blade Screw Blade Arm Screw
To Next Page
Loading...
