4
Intuitive Dial Programming…
For easy program entry
For contractors and homeowners alike, the
Pro-C provides step by step programming.
No complicated entry functions or repeti-
tive keystrokes. Just turn the dial to the
section of the program that needs to be
changed and use the plus, minus and next
buttons to make the adjustments. No other
programming method is easier.
Removable Front Panel for Remote
Programming…
Set the controller up without having to
stand in front of it
A removable hinge design allows easy
removal of the front panel without dis-
turbing eld wiring. With the use of a
9-volt battery, you can set the program
away from the cabinet location. This time-
saving feature allows the contractor to pro-
gram before going out
to the job (also serves
as a great sales demo
when talking to a
potential client). The
contractor can also give
the homeowner the
front panel while the
job is being installed to allow the hom-
eowner to try the programming functions
early on. When it comes time to actually
set up the controller, the homeowner is
completely clued in, making the whole
programming process a very simple one.
3 Programs (A, B, C) with
Multiple Start Times…
Different watering requirements are met
with independent programming
The Pro-C allows for many different irri-
gation applications using three completely
independent programs. This is ideal for
various types of plants that have separate
watering day requirements. Each program
has the ability to water up to four start
times per day. The user has complete ex-
ibility with watering schedules for new
seed or sod lawns, multiple cycles for
low inltration-rate soils, slopes, morning
or evening irrigation and other watering
window restrictions.
Up to Six-hour Station Run Times…
Allows accurate watering for all types of
plant material
Each station will operate up to six hours of
run time in any or all three programs. Run
times from 0-120 minutes program in one-
minute increments and then in ten-minute
increments up to six hours. The factory
default for all stations is set at 0 minutes
to eliminate any unneeded stations before
programming. Note: Using the water
budget feature, station run times may only
be increased to a maximum of 6 hours.
Choice of Independent Day
Scheduling Options…
Days of the week or 31-day interval for
maximum exibility
The watering day schedules in programs
A, B or C may be set up independently
from each other. In each program, the
choice of Custom (day of the week), Inter-
val (up to 31-days), Odd or Even days
PRODUCT FEATURES AND BENEFITS
(Continued)
To Next Page
Loading...
Need help?
General
