EasyManuals Logo

Hunter Pro-C Product Information

Hunter Pro-C
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #9 background imageLoading...
Page #9 background image
7
Pro-C Controller
Heavy-Duty Cabinet…
Built to overcome the elements -
for a long time
The Pro-C is built using a robust heavy-
duty plastic UL listed and NEMA 3R rated
cabinet, which is not subject to UV degra-
dation or color changes. For faster installa-
tion, the cabinet door hinge pin is remov-
able when the door is unlocked and open.
In addition, the cabinet uses the same pro-
fessional key lock on the outdoor model
as the Hunter ICC commercial controller.
The Pro-C cabinet is also designed with
a "-1" knockout option on the back of
the cabinet, and a 1" opening for
low voltage and
a " opening for
high voltage in
the bottom of
the cabinet to
accommodate
the wiring needs
of any job.
Programmable 0-7 Day Rain Delay…
No need to return to the controller
to turn it back on
The Pro-C allows you to turn off the con-
troller for a predetermined period of time
(1-7 days) during rainy weather. All pro-
grams are affected, as this delay is global.
After the specied period has elapsed, the
controller will return to automatic mode
and water as scheduled. This delay feature
is very convenient because when the con-
troller is turned off for an event such as
rain or a social activity, the operator will
not have to make a trip to the site to reacti-
vate the controller. In residential systems,
when the operator uses the watering delay
feature there’s no need to worry about
remembering that the controller has been
turned off.
Note: If the controller is programmed
with a 3-day or higher interval-watering
schedule in a program, the controller will
operate at the next watering start time,
regardless of the interval period, effec-
tively resetting the start of the interval
period.
Programmable Delay Between Stations…
Slow closing valves and well recovery will
never be an issue
A programmable delay between stations
solves the problem of slow closing valves
because of a hydraulic overload condition.
The delay also solves the problem of a
system operating off of a slow lling
well, allowing the well to recover between
zones. The Pro-C’s programming will
allow it to t into any situation where a
delay is necessary, as the delay is program-
mable up to four hours. Delays from 0 to
60 seconds are allocated in 5-second incre-
ments and then up to 4 hours in 1-minute
increments. Note: If the MV circuit is pro-
grammed to operate on the zone, it will
stay hot for the rst minute of any pro-
grammed delay.

Other manuals for Hunter Pro-C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Hunter Pro-C and is the answer not in the manual?

Hunter Pro-C Specifications

General IconGeneral
Start Times Per Program4
Warranty2 years
Cycle + SoakYes
DisplayLCD
Housing MaterialPlastic
Zones6, 8, 12, 16 (depending on model)
Indoor/OutdoorIndoor
MountingWall-mount
Electrical Input120V AC, 60Hz
Transformer Output24V AC
Number of Stations6, 8, 12, 16 (depending on model)
Wireless CapabilityNo

Related product manuals