Hunter RL - Control Panel

RL, RLHD OPERATION MANUAL 1. For Your Safety  7
1.2 Control Panel
HUNTER
MODEL RL
POWER
LOCK/LEVEL
RUN
CAUTION:
1. Do not exceed rated lifting capacity.
2. Set vehicle parking brake, chock wheels before operating lift rack
3. ensure that operating area is free of obstructions and personnel.
OPERATING INSTRUCTIONS
TO RAISE LIFT RACK:
TO LOWER LIFT RACK:
1. Turn “POWER” SWITCH to “ON” position.
1..Turn “POWER” switch to “ON”
2. Depress “RAISE” button to begin
raising lift rack.
Release button when rack reaches
desired height
2. Depress “LOWER” button to begin
lowering lift rack. Release button
when lift rack reaches fully
descended position.
3. Depress “LOCK” button until lift
rack locks are engaged.
3. Depress “LOCK” button until lift
rack is resting on all floor stops.
4. Turn “POWER” switch to “OFF”
4. Turn “POWER” switch to “OFF”
position.
RAISE
LOWER
OFF ON