■ Press again to change to Monday’s program.
■ Continue pressing to cycle through each day.
■ Press repeatedly to cycle through the 4 programs.
■ Press to return to normal mode.
■ After 15 seconds, the thermostat will return to nor-
mal mode automatically.
NOTE:
Programs take affect as soon as the thermostat returns to normal mode.
If you are armchair programming the thermostat, slide the system selector to the OFF position before
mounting the thermostat to the wallplate.
Reviewing the Current Temperature Setting
■ Current time and temperature.
■ Press for 1 second or less.
■ Set Temperature is shown above current room
temperature.
■ If held for over 1 second, Temporary Manual Over-
ride mode is entered. Refer to the next page.
To Next Page
Loading...
Need help?
General
