7-Day Programming
■ Slide System Selector Switch to HEAT or COOL to
program the corresponding system.
STEP 1: ■ Press to enter program mode, display shows week-
day programs.
■ Press 2 times to reach the Monday program.
STEP 2: ■ Use
, and
program
keys to set
the 4 programs for Monday.
STEP 3: ■ Press to change to the next day’s programs.
■ Repeat Step 2 to complete the selected day’s programs.
■ Continue repeating Steps 2 and 3 to program all 7
days of the week.
STEP 4: ■ When finished press to return to normal mode.
■ After 15 seconds, the thermostat will return to
normal mode automatically.
STEP 5: ■ Change the System Selector Switch to the other
system, and repeat Steps 1 through 4 above.
system
cool
heat
off
program
prog day
prog day
To Next Page
Loading...
Need help?
General
