39
Problem (cont.) Solution (cont.)
Erratic Display
If unit continues to operate in
the Off position
Thermostat permanently reads
“HI,” “LO,” or “ERR-” after
pressing reset button
1. Press the RESET button once with a small pin and hold for two
seconds. The thermostat will need to be re-programmed.
1. Replace unit.
1. Replace unit.
If you experience any other problems, call 1-866-268-1936 from 8 AM to 5 PM Central Time for technical assis-
tance.
41665-01.pmd 9/30/03, 4:53 PM39
To Next Page
Loading...
