Hunter SmartWeight Pro - Getting Started; Corporate Information; Hazard Definitions; Electrical Safety Precautions

2. Getting Started
This manual provides operaon instrucons and informaon required to operate the SmartWeight® Pro.
Read and become familiar with the contents of this manual prior to operang the equipment. The owner of this equipment
is solely responsible for arranging technical training.
The SmartWeight® Pro is to be operated only by qualied trained technicians. Maintaining records of personnel trained is
solely the responsibility of the owner and management. This manual assumes the technician has already been trained in
basic balancing procedures.
2.1. Corporate Information
Hunter Engineering Company
Address: 11250 Hunter Drive, Bridgeton, MO 63044 USA
Phone: 314-731-3020
Web:
www.hunter.com
2.2. For Your Safety
2.2.1. Hazard Definitions
Watch for these symbols:
CAUTION
Cauon: Hazards or unsafe pracces, which could result in minor personal injury or product or property
damage.
WARNING
Warning: Hazards or unsafe pracces, which could result in severe personal injury or death.
DANGER
Danger: Immediate hazards, which will result in severe personal injury or death.
These symbols idenfy situaons that could be detrimental to your safety and or cause equipment damage.
2.2.2. Important Safety Instructions - Electrical
Do not operate equipment with a damaged cord or equipment that has been dropped or damaged unl examined by a
Hunter Service Representave.
If an extension cord is necessary, it must have a current rang equal to or more than that of the equipment. Cords rated for
less may overheat. Arrange the cord so that it will not be tripped over or pulled.
Never use the cord to pull the plug from the outlet. Do not let cord hang over any edge or contact fan blades or hot
manifolds.
Verify that the electrical supply circuit and the receptacle are properly grounded.
SmartWeight
®
Pro Operations Manual
Page 4 of 11