4
GETTING STARTED
Components
When unpacking the power supply, be sure the following components are included:
■
One NEMA enclosure with power supply, cover, and cover screws
■
One 6' IEC power cord
■
Two
1
⁄
2
" strain reliefs and two 1
1
⁄
4
" strain reliefs
■
Two packages of plug-in male connectors (eight count per package)
■
Four mounting feet (pre-installed onto NEMA enclosure)
■
Installation guide
IMPORTANT: If you ordered a PowerView+
™
daisy-chain cable, check the shade
packaging for this component.
Specifications
Input: 120V AC, 6A
Output: 18V DC, 90 Watts
Wire Compatibility: 12-18 AWG wiring for power; 20-24 AWG shielded, twisted pair for
data
Wire Circuit Class: 2
Dimensions
Length: 10" (without mounting feet)
12
1
⁄
4
" (with mounting feet)
Width: 10"
Depth: 4" (without mounting feet)
4
1
⁄
4
" (with mounting feet)
Weight: 10 lbs
WARNING: To reduce the risk of fire, electric shock, or injury to persons,
installation work and electrical wiring must be done by a qualified person in
accordance with all applicable codes and standards.
To Next Page
Loading...