HUROM HG series - Slow Juicer Assembly

Align the chamber arrow [ ] with hopper arrow
[ OPEN] and turn the hopper clockwise until
it clicks so that the hopper arrow [ CLOSE]
aligned with chamber arrow[ ].
OPEN
SLOW JUICER ASSEMbLY
Place the chamber in the base.
Make sure to press the auger down into the strainer in
STEP 2. The hopper does not close properly when the
auger does not fit in completely.
4
3
2
1
Assemble the parts in the following order:
Chamber>Spinning Brush>Strainer.
Make sure chamber arrow [
] aligns with
strainer arrow [
].
08 l
A spinning brush can be assembled regardless
of the direction.
STEP
STEP
STEP
STEP
HG-2 4PJ12249_V.01.indd 10 2013-08-14 오후 1:50:18