HURST eDRAULIC E2 - 7.2 Oscillation;vibration; 7.3 Product capacity

15
en
es
fr
pt
7.2 Oscillation/vibration
The total oscillation value / vibration value to which human arms should be ex-
posed to is typically below 2�5 m/s²�
Higher values may be measured for short periods as a result of interaction with the
materials to be processed�
(The oscillations / vibrations were determined in accordance with DIN EN ISO 20643�)
7.3 Product capacity
Type
Cutter opening [mm]
Spreading force [kN]
Spreading width [mm]
Classication based on the minimum
performance of the cutter
Weight [kg]
(accurate to one decimal place)
Cutter power
Round material
Flat material
Sö
Maßstab 1:10
Rechtecke für Maßband 50x23, Strich für Teilung 11,5 lang
Lz Ls
Maßstab 1:10
Rechtecke für Maßband 50x23, Strich für Teilung 11,5 lang
MIN
KG