Husky 671-049 - Assembly Instructions; Attaching the Air Hose

Page 9
FEATURES
HANDLE
The air compressor is equipped with a padded carrying handle
for ease of use.
OIL-FREE INDUCTION MOTOR
Your air compressor features permanently lubricated bearings.
PRESSURE REGULATOR KNOB
Use the pressure regulator knob to adjust the amount of air
being delivered through the hose.
PRESSURE RELIEF VALVE
The pressure relief valve is designed to automatically release
air if the air receiver pressure exceeds the preset maximum.
REGULATOR PRESSURE GAUGE
The current line pressure is displayed on the regulator
pressure gauge. This pressure can be adjusted by rotating the
pressure regulator knob.
TANK PRESSURE GAUGE
The tank pressure gauge indicates the pressure of the air in
the tank.
ASSEMBLY
ATTACHING HOSE
See Figure 3.
g Make sure the air compressor is off and unplugged.
 Setupinstructions:
 1. Compressorisassembledatfactoryandreadyfor
use. Check all components to ensure secure assembly,
ie., rubber feet, wheels, handle, quick connects, gages,
  safetyvalve,airlter,drainvalve,etc.
2. Apply thread tape to threaded connections of hose,attach
  quick coupler to hose with a wrench (wrench is not
  provided).
 3.Apply thread tape to threaded connections of male
  plug,attachmaleplugtohosewithawrench(wrenchis
  notprovided).
gRotatepressureregulatorknobfullycounterclockwise.
g Insert hose adapter end of air hose into female coupler end
in air compressor.
FEMALE COUPLER
HOSE ADAPTER
END
PRESSURE REGULATOR KNOB OFF
Figure3
KNOW YOUR AIR COMPRESSOR
See Figure 2.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well
asaknowledgeoftheprojectyouareattempting.Beforeuseofthisproduct,familiarizeyourselfwithalloperatingfeaturesand
safety rules.