Husky 671-049 - Symbols and Signal Words; Electrical Symbols Explained; Operational Symbols Explained

Page 4
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the tool better and safer.
SYMBOLS
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequenct(cyclespersecond)
Alternating Current Type of current
Class II Construction Double-insulatedconstructon
Wet Conditions Alert Donotexposetorainoruseindamplocations.
ReadTheOperator’sManual To reduce the risk of injury, user must read and understand
operator’s manual before using this product.
Eye Protection Always wear safety goggles or safety glasses with side shields
and, as necessary, a full face shield when operating this product.
Safety Alert Precautions that involve your safety.
RiskofBursting Donotadjustregulatortoresultinoutputpressuregreaterthan
marked maximum pressure of attachment. Donotuseapres-
sure greater than maximum rated pressure of compressor.
RiskofFireorExplosion Donotsprayammableliquidinaconnedarea.Sprayarea
mustbewellventilated.Donotsmokewhilesprayingorspray
wheresparkorameispresent.Keepcompressorsasfarfrom
thesprayingareaaspossible,atleast15feetfromthespraying
area and all explosive vapors.
RiskofElectricalShock HazardousVoltage:Disconnectfrompowersourcebeforeser-
vicing.
Compressor must be grounded.
Hot Surface To reduce the risk of injury or damage, avoid contact with any
hot surface.
RisktoBreathing Air obtained directly from the air compressor should never be
used to supply air for human consumption.