10
Operation
3
Lock bUsing the utton
□ To lock the paddle switch (C), slide the lock button
(D) to the locked position. To unlock the paddle
switch (C), slide the lock button (D) to the unlocked
position. The paddle switch (C) will not work when
the lock button (D) is in the locked position.
WARNING:
Always lock the paddle
switch before performing
maintenance, changing accessories,
storing the tool and any time the tool
is not in use.
WARNING:
To reduce the risk of
injury, wear safety goggles with side
shields.
4
Turning the ratchet on and off
□ Release the lock button (D) by pushing it forward.
□ To start the tool, press the paddle switch (C).
□ To stop the tool, release the paddle switch (C).
5
Forward/reverse lever
□ For forward (clockwise) rotation, rotate the
forward/reverse lever (B) counterclockwise. Check
the direction of rotation before use.
□ For reverse (counterclockwise) rotation, rotate the
forward/reverse lever (B) clockwise. Check the
direction of rotation before use.
D
C
Forward
Reverse
B
Using the
To Next Page
Loading...
