Husqvarna 120 - English; Table of Contents; Contents

8 – English
Contents
KEY TO SYMBOLS
Symbols on the machine and/or in the manual: .....
7
CONTENTS
Contents ...............................................................
8
INTRODUCTION
Dear Customer, .....................................................
9
WHAT IS WHAT?
What is what on the chain saw? ............................
9
GENERAL SAFETY PRECAUTIONS
Before using a new chain saw ...............................
10
Important ..............................................................
10
Always use common sense ...................................
10
Personal protective equipment ..............................
11
Machine’s safety equipment ..................................
11
Cutting equipment .................................................
13
ASSEMBLY
Fitting the bar and chain ........................................
16
FUEL HANDLING
Fuel .......................................................................
17
Fueling ..................................................................
18
Fuel safety ............................................................
18
STARTING AND STOPPING
Starting and stopping ............................................
19
WORKING TECHNIQUES
Before use: ............................................................
20
General working instructions .................................
20
How to avoid kickback ...........................................
23
MAINTENANCE
General .................................................................
24
Carburettor adjustment .........................................
24
Checking, maintaining and servicing chain saw
safety equipment ...................................................
24
Muffler ...................................................................
25
Starter housing .....................................................
25
Air filter ..................................................................
26
Spark plug .............................................................
26
Cooling system .....................................................
26
Maintenance schedule ..........................................
27
TECHNICAL DATA
Technical data .......................................................
28
Guide bar and saw chain combinations .................
29
Saw chain filing and file gauges ............................
29
EC Declaration of Conformity .................................
29
CONTENTS