3012-1420
English - 58
MENU FUNCTIONS
Drive past wire
The front of the robotic lawnmower always passes the
boundary wire by a specic distance before the mower
turns around. The default distance is 32 cm, but this can
be changed if required. A gure between 25 and 50 can
be selected.
Note that the distance given is only an approximate value
and should be regarded as a guide. In reality, the actual
distance the robotic mower passes the boundary wire can
vary.
Specify the number of centimetres you want the robotic
lawnmower to pass the boundary wire and press OK.
OM_1157863-26_HQ 310,315,EN_160229.indd 58 2016-02-29 10:52:28
To Next Page
Loading...
