9
. Manipulate the carburetor to allow the dog-leg of
the throttle wire and choke wire to be inserted in
the throttle and choke levers.
● Push the fuel pick-up hose onto the carburetor in-
let nipple.
●
Install the carburetor/insulating block gasket, car
buretor and air filter body. Be sure to align all-
components.
Insert the 2 (long) carburetor
mounting screws and torque to spec. (see
Section 2 Service Data).
●
Install the air filter element
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com
To Next Page
Loading...
