Husqvarna 33 - Mounting Guide Bar and Chain; Attaching Guide Bar and Chain

4 SAFETYEQUIPMENT
.
CHAIN BRAKE
CA!2
\
2
‘,
\
● Release the chain brake by pulling back on the
handguard. Remove the guide bar clamping nut
and rear screw. Remove the clutch cover and
clean the chain brake mechanism.
. Pull back on the handguard to
band tension. Insert the band
fully release brake
ring-tool.
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com