Husqvarna 33 - Electronic System

6 ELECTRONIC SYSTEM
. Move the on/off switch to the “on” position.
. Ground the spark plug against the cylinder fin as
shown.
AI
I
nsure the spark plug is routed well away from the
spark plug hole in the cylinder and the exhaust
outlet to prevent a fire from the escaping gases
while turning the engine over. Rapidly pull the
starter handle and watch for a spark between the
spark plug electrodes.
If there is no spark, try
another spark plug.
.—
For Husqvarna Parts Call 606-678-9623 or 606-561-4983
www.mymowerparts.com