WORKING TECHNIQUES
English – 21
Before use:
1 Check that the chain brake works correctly and is not
damaged.
2 Check that the throttle lockout works correctly and is
not damaged.
3 Check that the stop switch works correctly and is not
damaged.
4 Check that all handles are free from oil.
5 Check that the anti vibration system works and is not
damaged.
6 Check that the muffler is securely attached and not
damaged.
7 Check that all parts of the chain saw are tightened
correctly and that the
y are not damaged or missing.
8 Check that the chain catcher is in place and not
damaged.
9 Check that the chain tension is correct.
General working instructions
During tree maintenance work above ground level the
chain saw must be secured. Secure the chain saw by
attaching a safety line to the fixing eye on the chain saw.
Wear personal protective equipment. See instructions
under the heading ”P
ersonal protective equipment”.
Basic safety rules
1 Look around you:
• To ensure that people, animals or other things cannot
aff
ect your control of the machine.
• To make sure that none of the above might come
within reach of y
our saw or be injured by falling trees.
NB! Follow the instructions above, but do not use a chain
sa
w in a situation where you cannot call for help in case
of an accident.
2 All tree maintenance work above ground level must be
carr
ied out by two or more persons with the right
training (see instructions under the heading
Important). At least one person should be on the
ground to carry out safe rescue procedures and/or get
help should an emergency arise.
3 During tree maintenance work above ground level, the
w
orking area should always be secured and marked
out with signs, tape or the like. The person(s) on the
ground should always inform the person(s) working
above before they enter the secure working area.
4 Do not use the machine in bad weather, such as
dense f
og, heavy rain, strong wind, intense cold, etc.
Working in bad weather is tiring and often brings
added risks, such as icy ground, unpredictable felling
direction, etc.
5 Take great care when removing small branches and
a
void cutting bushes (i.e. cutting many small branches
at the same time). Small branches can be grabbed by
the chain and thrown back at you, causing serious
injury.
6 Make sure you can move and stand safely. Check the
area around y
ou for possible obstacles (roots, rocks,
branches, ditches, etc.) in case you have to move
suddenly. Take great care when working on sloping
ground.
7 Take great care when cutting a tree that is in tension.
A tree that is in tension ma
y spring back to its normal
position before or after being cut. If you position
IMPORTANT!
This section describes basic safety rules for using a
chain sa
w. This information is never a substitute for
professional skills and experience. If you get into a
situation where you feel unsafe, stop and seek expert
advice. Contact your chain saw dealer, service agent or
an experienced chain saw user. Do not attempt any task
that you feel unsure of!
Before using a chain saw you must understand the
eff
ects of kickback and how to avoid them. See
instructions under the heading How to avoid kickback.
Before using a chain saw you must understand the
difference between cutting with the top and bottom
edges of the bar. See instructions under the headings
How to avoid kickback and Machine’s safety equipment.
1
2
3
4
6
8
To Next Page
Loading...
Need help?
General
