Husqvarna 372 XP W X-TORQ - Technical Data

38 – English
TECHNICAL DATA
Technical data
365 X-Torq 372XP X-Torq 372XPG X-Torq
Motor
Cylinder displacement, cu.in/cm
3
4,31/70,7 4,31/70,7 4,31/70,7
Cylinder bore, inch/mm 1,97/50 1,97/50 1,97/50
Stroke, inch/mm 1,42/36 1,42/36 1,42/36
Idle speed, rpm 2700 2700 2700
Power, kW/hp @ rpm 3,6/4,9 @ 10 200 4,1/5,6 @ 10 200 4,1/5,6 @ 10 200
Ignition system
Spark plug NGK BPMR 7A NGK BPMR 7A NGK BPMR 7A
Electrode gap, inch/mm 0,02/0,5 0,02/0,5 0,02/0,5
Fuel and lubrication system
Fuel tank capacity, US pint/litre 1,63/0,77 1,63/0,77 1,63/0,77
Oil pump capacity at 9,000 rpm, ml/min 4-21 4-21 4-21
Oil tank capacity, US pint/litre 0,89/0,42 0,89/0,42 0,89/0,42
Type of oil pump Automatic Automatic Automatic
Weight
Chain saw without bar or chain, empty tanks, lb/kg 14,1/6,4 14,1/6,4 14,5/6,6
Chain/bar
Standard bar length, inch/cm 20”/51 20”/51 20"/51
Recommended bar lengths, inch/cm 16-28”/38-70 16-28”/38-70 16-28”/38-70
Usable cutting length, inches/cm 15-27”/38-69 15-27”/38-69 15-27”/38-69
Pitch, inch/mm 3/8" /9,52 3/8" /9,52 3/8" /9,52
Thickness of drive links, inch/mm 0,050/1,3 0,050/1,3 0,050/1,3
0,058/1,5 0,058/1,5 0,058/1,5
Drive sprocket type/teeth Rim/7 Rim/7 Rim/7
Chain speed at max. power, m/sec 22,7 22,7 22,7