and/or servicing the spark arrester, make
sure you always:
• wear gloves;
• clean and/or service in a well ventilated
area;
• do not use pressurized air to clean the
spark arrester screen;
• use a steel brush and brush away from
your body when cleaning the spark
arrester.
WARNING: Do not use a product that
has a defective muffler or a muffler that is in
bad condition.
WARNING: Do not use a product if
the spark arrestor mesh on the muffler is
missing or defective.
1. Examine the muffler for damages and defects.
2. Make sure that the muffler is correctly attached to
the product.
Note: Do not remove the muffler from the product.
3. If your product has a special spark arrestor mesh,
clean the spark arrestor mesh weekly.
4. Replace a damaged spark arrestor mesh.
CAUTION: If the spark arrestor mesh
is blocked the product becomes too hot
and this causes damage to the cylinder and
piston.
AutoTune
™
Your product has the AutoTune
™
function that adjusts
the carburetor automatically, which gives the best
possible adjustment. AutoTune
™
lets the engine adapt
to weather conditions, altitude, gasoline and the type of
two-stroke oil.
CAUTION:
If AutoTune
™
does not work
correctly, speak to your servicing dealer.
The product adjusts correctly after some
fuelings.
To replace a broken or worn starter
rope
1. Loosen the screws to the starter housing
2. Remove the starter housing.
544 - 010 - 12.01.2023
25
To Next Page
Loading...
