CARBURETTOR
English – 33
WARNING!
The fuel used in the chainsaw has the
following hazardous properties:
1. The fluid and its fumes are poisonous.
2. Can cause skin irritation.
3. Is highly inflammable.
!
Dismantling
1. Remove the cylinder cover and air lter.
2. Remove the carburettor control (D) by pulling.
Disconnect switch wires (E and F). See g. 8.
3. Unhook the throttle cable (A). See g. 8.
4. Remove the fuel pipe (B).
5. Remove 4 bolts (G) which secure the lter holder,
carburettor and choke system.
6. Loosen the lter holder and disconnect the rear
rubber mounts (H). See g. 9.
7. Remove the lterholder with carburettor and choke
system. See g. 9.
Fig. 9
G
H
H
Fig. 8
B
C
A
D
F
E
To Next Page
Loading...
