Why does my Husqvarna 701 Enduro LR Motorcycle engine only turn if the clutch lever is drawn?
If your Husqvarna Motorcycle engine only turns when the clutch lever is drawn, it could be because the vehicle is in gear. Shift the transmission to neutral. It could also be that the vehicle is in gear and the side stand is folded out, so shift the transmission to neutral.
Why is the time not correctly displayed on my Husqvarna 701 Enduro LR Motorcycle?
If the time is not correctly displayed on your Husqvarna Motorcycle, fuse 1 might be blown, so change the fuse and set the clock.
General| Brand | Husqvarna |
|---|---|
| Model | 701 Enduro LR |
| Category | Motorcycle |
| Language | English |
Explains the meaning of specific symbols used in the manual.
Explains the typographical formats used in the document.
Defines the intended use and limitations of the vehicle.
Describes what constitutes misuse of the vehicle and potential dangers.
Emphasizes the importance of following safety instructions.
Explains the different risk levels and associated symbols used.
Warns against tampering with the noise control system and lists prohibited acts.
Provides essential guidelines for safe operation of the vehicle.
Stresses the importance of wearing appropriate protective clothing for safety.
Outlines general rules and precautions to follow when performing work on the vehicle.
Advises on responsible motorcycle use and environmental consciousness.
Highlights the importance of reading and keeping the Owner's Manual accessible.
Explains warranty conditions and voiding factors.
Provides notes on the proper handling and use of fuels and auxiliary substances.
Advises on using approved spare parts and accessories for safety.
Emphasizes the importance of proper service for vehicle longevity and performance.
Notes that figures may depict special equipment and may not show full disassembly.
Directs users to dealers for questions and provides website information.
Illustrates and labels components visible from the front left of the vehicle.
Illustrates and labels components visible from the rear right of the vehicle.
Describes the location of the vehicle identification number stamped on the steering head.
Indicates the locations of Europe and Australia type labels on the frame.
Explains where to find the key number and its importance for ordering spare keys.
Describes the location of the engine number stamped on the engine.
Specifies the location of the fork part number stamped on the fork stub.
Indicates the location of the shock absorber article number on the shock absorber.
Describes the clutch lever's location, function, and hydraulic activation.
Describes the hand brake lever's location and function operating the front brake.
Describes the throttle grip's location on the right handlebar.
Details the horn button's location and its two possible states.
Explains the light switch's location and its possible states for beam control.
Describes the turn signal switch's location and its operation for signaling.
Details the emergency OFF switch's location and its two possible states for stopping the engine.
Describes the start button's location and operation to actuate the starter motor.
Explains the combination switch's location and its function for drive modes and traction control.
Details the ignition and steering lock's location and its possible states.
Explains the meaning and function of various indicator lamps on the instrument panel.
Describes the fuel pump switch's location and its role in controlling fuel tanks.
Mentions the presence of two separate fuel tanks and their control.
Provides instructions on how to open the fuel tank filler caps.
Provides instructions on how to close the fuel tank filler caps.
Describes the location and possible states of the fuel cocks.
Explains how to unlock the seat using a loop.
Describes the use of grab handles for moving the motorcycle and for passengers.
Explains the folding mechanism of passenger foot pegs for different riding scenarios.
Details the shift lever's location and shows gear positions.
Describes the location of the foot brake lever and its engagement of the rear brake.
Explains the location and use of the side stand for parking and its coupling with the safety system.
Labels the components of the combination instrument display and buttons.
Explains how the combination instrument is activated by button press or sensor input.
Details possible messages displayed by the instrument, like battery voltage.
Outlines the condition for setting the instrument and general procedure.
Describes how to change the unit of measurement for speed and distance.
Explains how to set the clock display (24h/12h) and adjust time.
Details how to set and adjust the service interval display.
Explains how to display and reset trip distance (DST).
Explains how to display and reset the second trip distance (DST2).
Describes how to view average speed, operating hours, and total distance.
Provides crucial advice for the initial use of the vehicle.
Details the procedure and speed limits for the engine's run-in phase.
Gives warnings and guidelines regarding vehicle weight, payload, and luggage mounting.
Lists essential checks and maintenance steps to perform before every trip.
Provides instructions and safety warnings for starting the motorcycle engine.
Explains the procedure for moving off from a standstill.
Offers guidance on gear shifting, riding techniques, and road conditions.
Details how to apply the brakes, including safety warnings and ABS considerations.
Provides instructions and precautions for stopping and parking the motorcycle safely.
Gives notes and instructions related to transporting the motorcycle.
Details the refueling process, including safety warnings and fuel specifications.
Provides context on service intervals and how to find the most up-to-date schedule.
Lists the maintenance tasks required at different service intervals.
Lists recommended maintenance tasks that are not strictly required but beneficial.
Introduces the options for adapting the chassis to riding style and payload.
Explains how to adjust the compression damping of the front fork.
Details how to adjust the rebound damping of the front fork.
Explains the concept of high-speed and low-speed compression damping for the shock absorber.
Guides on adjusting the low-speed compression damping of the rear shock absorber.
Guides on adjusting the high-speed compression damping of the rear shock absorber.
Details how to adjust the rebound damping of the rear shock absorber.
Describes the preparatory and main steps for measuring rear wheel dimension.
Explains how to check the static sag of the rear shock absorber.
Details how to check the riding sag of the rear shock absorber.
Guides on adjusting the spring preload of the rear shock absorber.
Explains how to adjust the riding sag of the rear shock absorber.
Describes the handlebar mounting options and hole distance.
Provides a warning about repaired handlebars and how to adjust position.
Details the procedure for raising the motorcycle using a lift stand safely.
Explains how to safely remove the motorcycle from the lift stand.
Provides instructions on bleeding the fork legs to release excess pressure.
Guides on cleaning the dust boots of the fork legs to prevent oil seal leaks.
Details the steps for removing the fork protector, including screw locations.
Explains how to mount and tighten the fork protector, including torque specifications.
Describes how to check for play in the steering head bearing and potential damage.
Guides on adjusting the steering head bearing play and checking for detent positions.
Explains how to remove the motorcycle seat using a loop.
Details the procedure for correctly mounting the motorcycle seat.
Outlines the steps for removing the front fender, including preparatory work.
Explains how to mount and tighten the front fender, including torque specs.
Guides on checking the chain for heavy soiling and cleaning if necessary.
Provides instructions for cleaning the motorcycle chain safely.
Explains how to check and set the chain tension according to specifications.
Details how to adjust the chain tension and align the rear wheel.
Guides on inspecting the chain, sprockets, and chain guide for wear.
Explains how to adjust the chain guide based on the number of teeth.
Guides on adjusting the clutch lever's position for comfort and clearance.
Provides instructions and warnings for checking and correcting the hydraulic clutch fluid level.
Details the steps for removing the engine guard.
Explains how to install the engine guard, including mounting and tightening screws.
Explains the ABS system, its components, and warnings about changes.
Guides on adjusting the hand brake lever position for hand size and comfort.
Explains how to check brake discs for wear and damage.
Details how to check the front brake fluid level and warnings.
Provides instructions and safety warnings for adding front brake fluid.
Explains how to check the minimum thickness and condition of front brake linings.
Guides on changing the front brake linings, including safety warnings.
Details how to check and set the free travel of the foot brake lever.
Guides on adjusting the basic position of the foot brake lever.
Explains how to check the rear brake fluid level and warnings.
Provides instructions and safety warnings for adding rear brake fluid.
Explains how to check the minimum thickness and condition of rear brake linings.
Guides on changing the rear brake linings, including safety warnings.
Details the preparatory and main steps for removing the front wheel.
Guides on installing the front wheel, including checks and greasing.
Outlines the steps for removing the rear wheel, including chain adjuster and wheel spindle.
Details the procedure for installing the rear wheel, including checks and greasing.
Explains how to check the damping rubber pieces for wear and damage.
Provides advice on checking tires for damage, wear, and tread depth.
Details how to check tire pressure for different riding conditions and warnings.
Explains how to check spoke tension by sound and the importance of regular checks.
Provides warnings and recommendations regarding the use of tire repair spray.
Details the procedure and safety warnings for removing the 12-V battery.
Guides on installing the 12-V battery, including cable connections and screw torque.
Provides instructions and precautions for charging the 12-V battery.
Explains how to change the main fuse and lists its functions.
Details how to change the ABS fuses for the hydraulic unit and return pump.
Guides on locating and changing fuses for individual power consumers in the fuse box.
Details the steps for removing the headlight mask and disconnecting the headlight.
Explains how to install the headlight mask and connect the headlight.
Guides on changing the headlight bulb, including cleaning and handling precautions.
Details how to change the position light bulb, including handling precautions.
Explains how to check and verify the correct headlight beam setting.
Guides on adjusting the headlight range to meet specifications.
Describes the location and fuse protection of ACC1 and ACC2 power supplies.
Indicates the location of the diagnostics connector under the engine electronics control unit.
Explains the function of the water pump, radiator cap, and compensating tank.
Provides instructions and safety warnings for checking coolant and antifreeze levels.
Details how to check the coolant level in the compensating tank and radiator.
Provides instructions and safety warnings for draining the cooling system.
Guides on refilling and bleeding the cooling system after draining.
Details the procedure and safety warnings for changing the coolant.
Explains how to select different drive modes (ROAD/OFFROAD) using the MAP button.
Details how to activate and deactivate traction control using the TC button.
Explains how to check the shift lever's basic position relative to the rider's boot.
Guides on adjusting the shift lever's basic position for proper engagement.
Provides instructions and safety warnings for changing the fuel screen.
Details how to check the engine oil level and warnings.
Guides on changing engine oil, filter, and cleaning oil screens.
Explains how to add engine oil and warnings about oil quality.
Provides instructions and warnings for cleaning the motorcycle, especially with pressure washers.
Offers advice on checks and maintenance for operating the motorcycle in winter conditions.
Outlines steps for preparing the motorcycle for long-term storage.
Details the steps for getting the motorcycle ready after it has been stored.
Lists detailed specifications for the engine, including displacement, bore, and valve play.
Provides a table of tightening torques for various engine screws and bolts.
Lists the capacities for engine oil, coolant, and fuel.
Details specifications for the frame, fork, shock absorber, and brake system.
Lists specifications for the battery, fuses, headlight, and other electrical components.
Provides information on front and rear tire types and recommended suppliers.
Details fork article number, type, compression, and rebound damping settings.
Lists shock absorber article number, type, damping adjustments, and preload.
Lists tightening torques for various chassis screws and fittings.
To Next Page