Why does my Husqvarna Motorcycle engine have too little power?
If your Husqvarna Motorcycle engine has too little power, the issue might be: * **Defect in fuel injection system**: Read out the fault memory using the Husqvarna Motorcycles diagnostics tool. * **Map select switch incorrectly adjusted**: Adjust the engine characteristic.
What to do if the Husqvarna 701 Supermoto 2016 Motorcycle engine does not turn when pressing the starter button?
If the Husqvarna Motorcycle engine doesn't turn when you press the starter, there are several possible reasons: * **Operating error**: Make sure you are following the correct start procedure. * **Discharged battery**: Recharge the battery and check the quiescent current. * **Blown fuse**: Replace fuse 1 or 2, and then set the clock. * **Main fuse burned out**: Replace the main fuse. * **No ground connection**: Check the ground connection.
What to do if the Husqvarna 701 Supermoto 2016 Motorcycle engine turns but does not start?
If the Husqvarna Motorcycle engine turns but doesn't start, consider these potential causes: * **Operating error**: Ensure you are following the correct start procedure. * **Blown fuse**: Replace fuse 3. * **Fuel hose connection**: Connect the plug-in connection of the fuel line. * **Fuel injection system defect**: The fault memory should be read out using the Husqvarna Motorcycles diagnostics tool. * **Throttle opened while starting**: Do not open the throttle when starting, and ensure you follow the correct start procedure. * **Dirty air filter**: Remove and install the air filter. * **Dirty fuel screen**: Replace the fuel screen.
Why does the Husqvarna 701 Supermoto 2016 engine turn only if the clutch lever is drawn?
The Husqvarna Motorcycle engine may only turn if the clutch lever is drawn because: * **The vehicle is in gear**: Shift gear to neutral. * **The vehicle is in gear and the side stand is folded out**: Shift gear to neutral.
General| Engine Type | Single cylinder, 4-stroke |
|---|---|
| Displacement | 692.7 cc |
| Bore x Stroke | 105 mm x 80 mm |
| Lubrication | Forced oil lubrication with 2 oil pumps |
| Cooling | Liquid cooling |
| Transmission | 6-speed |
| Final Drive | Chain |
| Front Tire | 120/70 ZR17 |
| Rear Tire | 160/60 ZR 17 |
| Seat Height | 890 mm |
| Starter | Electric |
| Power | 50 kW (67 hp) @ 7, 500 rpm |
| Frame | Steel trellis frame |
| Front Suspension | WP upside-down 48 mm |
| Rear Suspension | WP monoshock |
| Front Brake | Single disc, 320 mm |
| Rear Brake | Single disc, 240 mm |
Guidelines for safe riding and operation of the vehicle.
Importance of wearing appropriate protective gear for rider safety.
Defines risk levels and associated warning symbols for hazards.
Explanation of dashboard warning and indicator lights.
Essential precautions and checks before the first ride.
Guidelines for the engine break-in period for longevity.
Comprehensive pre-ride inspection checklist.
Step-by-step procedure for starting the motorcycle engine.
Proper techniques for using front and rear brakes.
Maintenance tasks based on mileage and time intervals.
Step-by-step guide to adjusting chain tension.
Explanation of the ABS system and its function.
How to check and set correct tire air pressure.
How to change engine performance modes via Map-Select.
How to check the engine oil level using the viewer.
Procedure for engine oil and filter replacement.
To Next Page