15 ELECTRICAL SYSTEM 152
E00039-10
Main work
–
Loosen screw
.
– Adjust the headlight range by pivoting the headlight.
Guideline
The boundary between light and dark must be exactly on the lower mark for
a motorcycle with rider (instructions on how to apply the mark: Checking the
headlight setting).
Info
If you have a payload, you may have to correct the headlight range.
–
Tighten screw
.
15.13 Changing the turn signal bulb
Note
Damage to reflector Reduced brightness.
– Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
To Next Page
Loading...
Need help?
General
