Why is my Husqvarna 701 Supermoto 2017 Motorcycle using so much oil?
If your Husqvarna Motorcycle is experiencing high oil consumption, check the following: ensure the engine vent hose is not bent, and replace it if necessary. Verify that the engine oil level is not too high. Also, the engine oil might be too thin (low viscosity), in that case, change the engine oil and oil filter and clean the oil screens.
Why won't my Husqvarna Motorcycle engine turn over when I press the starter button?
Several factors could prevent your Husqvarna Motorcycle engine from turning over when you press the starter. It could be due to an operating error, so ensure you are following the correct start procedure. The battery might be discharged, requiring a recharge and a check of the open-circuit current. Also, check fuses 1 or 2, or the main fuse, as they may be blown and need replacing. Finally, verify that a proper ground connection is present.
What to do if my Husqvarna 701 Supermoto 2017 Motorcycle engine overheats?
If your Husqvarna Motorcycle engine is overheating, there are several potential causes to investigate. First, check the coolant level and look for any leaks in the cooling system. Ensure the radiator fins are clean. If there's foam formation in the cooling system, drain and refill/bleed the system. Inspect the radiator hose for buckling or damage. Other potential issues include a faulty thermostat, a blown fuse 4, a defect in the radiator fan system, or air trapped in the cooling system. Check these components to resolve the overheating issue.
What to do if my Husqvarna Motorcycle engine turns over but doesn't start?
If your Husqvarna Motorcycle engine turns over but doesn't start, consider these possible causes. Ensure you are following the correct start procedure, as operating error is a common issue. Check fuse 3, as it may be blown. Verify the plug-in connection of the fuel hose is properly connected. Also, make sure you are not opening the throttle while starting. Check if the air filter or fuel screen is dirty and clean or replace if necessary.
Why does my Husqvarna Motorcycle engine die while riding?
If your Husqvarna Motorcycle engine dies during a ride, the possible reasons include: lack of fuel, so refuel your motorcycle. Also, check fuses 1, 2, or 3, or the ABS fuse, as they may be blown and need replacement.
How to fix a discharged battery on my Husqvarna Motorcycle?
If your Husqvarna Motorcycle battery is discharged, it could be due to leaving the ignition on when parked. In this case, recharge the battery. Another possibility is that the alternator is not charging the battery, so check the charging voltage and the open-circuit current.
What does it mean when the ABS warning lamp lights up on my Husqvarna Motorcycle?
If the ABS warning lamp lights up on your Husqvarna Motorcycle, it indicates a malfunction in the ABS.
Why does my Husqvarna Motorcycle engine have low power?
If your Husqvarna Motorcycle engine has too little power, it could be due to a defect in the fuel injection system.
Why are the headlight and parking light not working on my Husqvarna 701 Supermoto 2017 Motorcycle?
If the headlight and parking light on your Husqvarna Motorcycle are not working, it is possible that fuse 6 is blown. Replace the fuse to resolve the issue.
Why aren't the turn signal, brake light, and horn working on my Husqvarna Motorcycle?
If the turn signal, brake light, and horn are not functioning on your Husqvarna Motorcycle, it's likely that fuse 5 is blown. Replace the fuse.
Provides safety instructions and emphasizes warning labels.
Explains different risk levels (Danger, Warning, Caution, Note) and their symbols.
Provides safety advice on riding, including risks of accidents, poisoning, and burns.
Emphasizes wearing protective clothing for safety.
Stresses reading the manual for operation, handling, and maintenance.
Emphasizes proper service and tuning for operation and wear prevention.
Details the location and states of the ignition and steering lock.
Provides an overview of the various indicator lamps and their meanings.
Offers advice on first use, including safety warnings about rider fitness, clothing, and tires.
Warns about unstable handling due to improper loading and provides payload limits.
Lists essential pre-ride checks and vehicle care steps.
Provides instructions for starting the engine, including safety and damage warnings.
Provides advice on shifting gears and general riding, including safety warnings.
Provides detailed instructions and warnings on brake application, including disc condition and overheating.
Gives instructions on how to stop and park the motorcycle safely, including theft prevention and fire hazards.
Details the refueling process, emphasizing fire safety and handling of fuel.
Lists required maintenance tasks at different intervals (km/years).
Guides on adjusting the fork's hydraulic compression damping.
Guides on adjusting the fork's hydraulic rebound damping.
Guides on adjusting the low-speed compression damping of the shock absorber.
Guides on adjusting the high-speed compression damping of the shock absorber.
Guides on adjusting the rebound damping of the shock absorber.
Guides on adjusting the spring preload of the shock absorber, including preparatory work.
Guides on adjusting the chain tension, including loosening nuts and turning adjusters.
Provides instructions for checking and correcting hydraulic clutch fluid level, with warnings.
Explains the ABS unit, sensors, and warnings about vehicle changes affecting ABS.
Explains how to check brake disc thickness and wear limits.
Emphasizes checking front brake fluid level and warnings about insufficient or old fluid.
Provides instructions for adding front brake fluid, with warnings.
Explains how to check front brake lining minimum thickness and for wear/tearing.
Details how to check the free travel of the foot brake lever and its specification.
Guides on adjusting the foot brake lever's basic position and checking free travel.
Emphasizes checking rear brake fluid level and warnings about insufficient or old fluid.
Provides instructions for adding rear brake fluid, with warnings.
Explains how to check rear brake lining minimum thickness and for wear/tearing.
Details preparatory and main work steps for removing the front wheel.
Provides warnings about brake discs and main work for installing the front wheel.
Details preparatory and main work steps for removing the rear wheel.
Provides warnings and main work for installing the rear wheel, including bearing checks.
Provides warnings about tire bursts, tread patterns, and new tire grip.
Provides safety warnings and steps for removing the motorcycle battery.
Guides on installing the motorcycle battery, including washer and cable connections.
Provides safety warnings and information on recharging the battery.
Provides warnings about fuses and explains the main fuse's function.
Provides warnings about fuses and indicates where ABS fuses are located.
Provides warnings about hot coolant and poisoning, and checks.
Repeats warnings about hot coolant and poisoning, and how to check levels.
Provides warnings about hot coolant and poisoning, and instructions for draining.
Gives warnings about poisoning and guides on filling/bleeding the cooling system.
Provides safety warnings and instructions for changing the fuel screen.
Explains how to check the engine oil level at operating temperature.
Provides warnings about hot oil and environmental hazards for oil change.
Outlines steps for preparing the motorcycle for use after storage, including checks and test ride.
Covers problems with the engine not turning over or not starting.
Addresses issues like low power, overheating, and engine dying during use.
General| Brand | Husqvarna |
|---|---|
| Model | 701 Supermoto 2017 |
| Category | Motorcycle |
| Language | English |
To Next Page