10 SERVICE SCHEDULE 60
10.1 Additional information
Any further work that results from the required work or from the recommended work must be ordered separately and can be invoiced
separately.
10.2 Required work
Every two years
Every year
every 20,000 km (12,400 mi)
every 10,000 km (6,200 mi)
after 1,000 km (620 mi)
Read out the fault memory using the Husqvarna Motorcycles diagnostics tool. ○ ● ● ● ●
Check that the electrical system is functioning properly. ○ ● ● ● ●
Change the engine oil and oil filter and clean the oil screens. ( p. 164) ○ ● ● ● ●
Check the front brake linings. ( p. 109) ○ ● ● ● ●
Check the rear brake linings. ( p. 114) ○ ● ● ● ●
Check the brake discs. ( p. 105) ○ ● ● ● ●
Check the brake lines for damage and leakage. ○ ● ● ● ●
Change the front brake fluid. ●
Change the rear brake fluid. ●
Change the hydraulic clutch fluid. ●
Check the rear brake fluid level. ( p. 112) ○ ● ● ●
Check the front brake fluid level. ( p. 106) ○ ● ● ●
Check/correct the fluid level of the hydraulic clutch. ( p. 101) ● ● ●
Check the free travel of the foot brake lever. ( p. 110) ○ ● ● ● ●
To Next Page
Loading...
Need help?
General
