6
–
En
lish
MA
CHINE´S SAFETY EQ
UIPMENT
General
This section describes the machine′s safety equipment, its
purpose, and how checks and maintenance should be carried
out to ensure that it operates correctly.
This machine is used in combination with other products.
Please read the manual provided with the products carefully
and make sure you understand the instructions before using
the machine.
Protective covers
The protective covers are designed to protect from accidental
contact with the cutting equipment and to reduce the risk of
accidents in case of a broken wire.
Inspection of the protective covers
• Check the protective covers for cracks or other damages.
Replace damaged covers.
!
WARNING! Never use a machine that has
faulty safety equipment! If your machine
fails any checks contact your service agent
to get it repaired.
!
WARNING! Never use the machine without a
guard nor with a defective guard. Always
check that the guards are correctly fitted
before starting the machine.
!
WARNING! Shut down the machine and
disconnect the power plug.
To Next Page
Loading...
Need help?
General