To Next PageTo Next Page
Need help?Do you have a question about the Husqvarna DM 340 and is the answer not in the manual?
Illustrates and explains symbols used on the drilling machine itself, including safety and environmental markings.
Explains symbols found within the operator's manual, covering maintenance, cleaning, and checks.
Electronic current limiter providing a softer start for the machine. Reaches maximum speed in about three seconds.
Feature that reduces speed when the button is pressed, useful for creating pilot holes.
Electronic overload protection considering voltage and temperature to prevent machine damage.
Function providing limited idling speed for more effective machine cooling.
Description of the carrying handle's function for transport and mounting.
Essential initial steps and checks before operating the drilling machine for the first time.
Emphasizes the importance of exercising caution and common sense during operation.
Details the mandatory personal protective equipment required for safe operation.
Details the function and protection provided by the ground fault circuit interrupter.
Instructions on how to test and verify the proper functioning of the GFCI.
Important checks and considerations before powering on the machine.
Step-by-step guide on how to safely start the drilling machine.
Procedure for safely shutting down the drilling machine.
Guidance on running the machine unloaded for motor cooling.
General care and importance of maintenance for machine longevity.
Detailed instructions for safely removing and installing drill bits.
Instructions on how to keep the machine and drill bits clean for safe operation.
Safety warning regarding damaged cables and electrical connections.
Procedure for changing the gearbox oil, including frequency and oil type.
Details the terms, conditions, and procedures for warranty claims.
Specifies the warranty period for manufactured equipment and component manufacturers.
General
