Husqvarna DM 330 User Manual

HUSQVARNA CONSTRUCTION PRODUCTS
US FR ES
Operator’s manual
Please read the operator’s manual carefully and make sure
you understand the instructions before using the machine.
Manuel d’utilisation
Lire attentivement et bien assimiler le manuel d’utilisation
avant d’utiliser la machine.
Manual de
US
FR
ES
instrucciones
Lea detenidamente el manual de instrucciones y asegúrese de
entender su contenido antes de utilizar la máquina.
DM 330

Husqvarna DM 330 Specifications

General

Brand	Husqvarna
Model	DM 330
Category	Drill
Language	English

Summary

Operator's Manual

English Operator's Manual

Primary manual for Husqvarna DM 330 in English.

French Operator's Manual

French version of the DM 330 operator's manual.

Spanish Operator's Manual

Spanish version of the DM 330 operator's manual.

Key to Symbols

Machine Symbols

Explains symbols found on the Husqvarna DM 330 drilling machine.

Manual Symbols

Explains symbols used within the operator's manual for instructions.

What is What?

DM 330 Machine Components Overview

Identifies and describes the individual parts of the DM 330 drilling machine.

Safety Instructions

Pre-Use Checks and PPE

Crucial steps before operation and required personal protective equipment.

General Safety Precautions

Broad safety guidelines for safe operation and work area management.

Electrical Safety Guidelines

Specific safety measures related to the machine's electrical power supply.

Personal Safety and Handling

Operator safety, proper handling, and precautions against entanglement.

Working Area and Drilling Safety

Guidelines for safe working practices, including outdoor and ceiling drilling.

Machine Safety Equipment

Information on integrated safety features, including the ground fault circuit interrupter.

Presentation

DM 330 Model Introduction

Overview of the DM 330 drilling machine, its design, and intended use.

Key Features: Softstart, Smartstart, Elgard

Details on Softstart, Smartstart, Elgard, and speed control functionalities.

Ergonomics and Handling

Information on the machine's ergonomic design for ease of transport and mounting.

Starting and Stopping

Pre-Operation Checks

Essential checks and preparations before operating the drilling machine.

Starting and Operating the Machine

Step-by-step instructions for starting and running the machine.

Shutdown and Cooling Procedures

Procedures for safely stopping the machine and cooling the motor.

Maintenance

General Maintenance and Cleaning

Basic maintenance, cleaning, and electrical connection checks.

Gearbox Oil and Carbon Brushes

Instructions for changing gearbox oil and replacing worn carbon brushes.

Seal Retainer and Daily Checks

Procedures for replacing seals and performing daily maintenance inspections.

Technical Data

DM 330 Specifications

Comprehensive technical data for the DM 330 drilling machine.

US Warranty Statement

Warranty Policy Details

Explains the warranty terms, conditions, and claim process.

Equipment Warranty and Exceptions

Lists covered equipment, component warranties, and specific exceptions.