To Next Page
K
kimchristineSep 13, 2025
What does blink code 22 mean on a Husqvarna Motorcycle?
- JjloveSep 13, 2025
Blink code 22 on your Husqvarna Motorcycle indicates an error level condition, specifically a gear position sensor – circuit fault.
What does blink code 22 mean on a Husqvarna Motorcycle?
Blink code 22 on your Husqvarna Motorcycle indicates an error level condition, specifically a gear position sensor – circuit fault.
General| Engine Type | Single-cylinder, 4-stroke |
|---|---|
| Displacement | 249.9 cc |
| Bore x Stroke | 78 mm x 52.3 mm |
| Compression Ratio | 14.4:1 |
| Starter | Electric |
| Transmission | 5-speed |
| Front Suspension | WP XACT-USD, Ø 48 mm |
| Ground Clearance | 370 mm |
| Fuel System | Fuel injection |
| Clutch | Wet multi-disc |
| Frame | Chromium Molybdenum Steel |
| Rear Suspension | WP XACT Monoshock |
| Front Brake | Disc brake |
| Rear Brake | Disc brake |
| Front Wheel | 21 inch |
| Rear Wheel | 19 inch |
| Wheelbase | 1485 mm |
Defines the intended use of the vehicle and its restrictions.
Describes potential dangers arising from unintended use of the vehicle.
Highlights the importance of following safety instructions and warning labels.
Explains the meaning of danger, warning, caution, and note symbols.
Warns against tampering with the noise control system and lists prohibited acts.
Provides critical safety information for operating the vehicle.
Emphasizes the importance of wearing appropriate protective clothing.
Shows where the Vehicle Identification Number is stamped on the steering head.
Indicates the location of the vehicle's type label on the steering head.
Shows the location of the engine number on the engine case.
Indicates where the fork article number is stamped on the axle clamp.
Shows the location of the shock absorber article number.
Describes the clutch lever and its operation.
Identifies the hand brake lever and its function.
Describes the throttle grip and its location.
Explains the function and states of the stop button.
Explains the function and states of the start button.
Details the functions of the combination switch and its modes.
Explains the meaning of various indicator lamps and their states.
Provides essential advice and safety precautions before the first ride.
Gives guidelines for the engine's running-in phase.
Advises on preparing the vehicle for challenging riding environments.
Details preparations for riding on dry sand.
Details preparations for riding on wet sand.
Details preparations for riding on wet and muddy circuits.
Advises on preparing the vehicle for high temperatures or slow riding.
Details preparations for riding in low temperatures or snow.
Lists essential checks and maintenance before riding.
Provides instructions and safety warnings for starting the vehicle.
Explains how to activate and use the launch control system.
Explains how to activate and use the traction control system.
Provides instructions on how to start moving from a standstill.
Offers guidance on shifting gears and riding techniques.
Explains how to apply the brakes effectively and safely.
Provides instructions on how to stop and park the vehicle safely.
Details the procedure and safety precautions for refueling.
Lists maintenance tasks required at different intervals.
Lists recommended maintenance tasks for optimal performance.
Explains how to adjust chassis settings based on rider weight.
Describes the air suspension system used in the fork.
Explains the concept of compression damping in the shock absorber.
Details how to adjust the low-speed compression damping.
Details how to adjust the high-speed compression damping.
Details how to adjust the rebound damping of the shock absorber.
Explains how to check the static sag of the shock absorber.
Explains how to check the riding sag of the shock absorber.
Details how to adjust the spring preload of the shock absorber.
Details how to adjust the riding sag.
Explains how to check the basic fork settings.
Details how to adjust the fork air pressure.
Details how to adjust the fork's compression damping.
Details how to adjust the fork's rebound damping.
Explains how to check for play in the steering head bearing.
Provides steps to adjust steering head bearing play.
Details the procedure for removing the fuel tank.
Details the procedure for installing the fuel tank.
Explains how to check the chain tension.
Details the procedure for changing engine oil, filter, and cleaning the screen.
Provides steps for preparing the motorcycle for long-term storage.
Details the steps for bringing the motorcycle back into service after storage.
