ENGINE
Manufacturer Kawasaki
Type FX751V
Power
24.5 hp
1)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 11 gallons 41,6 litres
Cooling Air cooled
Air lter Heavy duty canister
Alternator 12v 15 amp @ 3600 rpm
Starter Electric
TRANSMISSION
Transmission ZT-3400
Steering control Dual levers, foam gripped
Speed forward 0-10 mph 0-16,1 km/h
Speed reverse 0-5 mph 0-8 km/h
Brakes Internal Cog
Front caster tires 13 x 6.5-6
Rear tires, turf pneumatic 23 x 10.5-12
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 60" 152.2 cm
Cutting Height 1-1/2 - 5-1/2" 3,8-14 cm
Number of Blades 3
Blade Length 21" 48.25 cm
Anti-scalp roller 3 adjustable
Seat Commercial Premium EVC
Hinged Arm Rests Yes
Service Meter Digital
Blade Engagement 150 ft-lb Ogura Clutch
Deck Construction 10 gauge fabricated
Productivity 4.9 acres/h
19,830 m
2
/h
DIMENSIONS
Weight 1100 lbs 498 kg
Base Machine Length 81" 205 cm
Base Machine Height 50" 127 cm
Base Machine Width 51" 129 cm
Overall Width, Chute Up 61-1/2" 156 cm
Overall Width, Chute Down 73" 185 cm
Overall Height, ROPS up 73" 185 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
34
SERVICE JOURNAL